Inflatable sealed air tent

Inflatable sealed air tent

From £1,035.74 Excl. VAT

£1,035.74 Excl. VAT

?
?
?
?
?
?
?
?
?
?
?
?
Subtotal: £0.00 Excl. VAT
Estimated delivery date*: Thursday, 5th November

*for order placed with the design approved by 3pm same day

The Inflatable sealed air tent creates a custom-printable space for outdoor events, mobile meeting points and exhibition stalls. Choose from four sizes, with sealed-air legs that need no constant power supply after inflation.

Key features

  • Four size options from 3 × 3 m to 6 × 6 m
  • Custom printing available across the roof and walls
  • Four inflatable legs with airtight TPU inserts and outer polyester covers
  • Inflation and safety valves fitted to each leg
  • No constant power supply required after inflation
  • Carry bags supplied for mobile handling after deflation

Materials & build

Four inflatable legs support the roof canopy. Each leg has an airtight TPU insert, an outer polyester cover, an inflation valve and a safety valve. The TPU insert is 0.3 mm thick, while the polyester fabric weighs 235 g/m². The 5 × 5 m and 6 × 6 m versions have PVC leg bases.

Branding & visibility

The roof and walls can carry custom sublimation-printed graphics, and each canopy element can feature its own print. Graphic design service is available.

Use cases & who it’s for

The tent is suitable for outdoor events at various locations and outdoor promotional use. It can also serve as a mobile meeting point for clients or residents, or as an exhibition or trade stall inside facilities.

Setup, handling & transport

Set up on a flat, even surface, attach the guy ropes before inflation, and secure every leg using all anchoring points. Inflate each leg through its valve until rigid. After use, set the valves to deflate, roll the legs towards them and pack the clean, fully dry components into the carry bags for dry storage. This temporary event structure is not for permanent installation or use above 38 km/h (24 mph), or during storms, heavy rain, snow or hail.

What’s included & options

The set includes a TPU foil structure, polyester cover, printed roof, four factory-colour legs, four printed walls with zip fastening, carry bags, anchoring set, hammer and repair kit. Options include hand or electric pumps, lighting, an LED panel, flooring, alternative walls, weights, an entrance porch and a connector. Flame-retardant B1 (DIN 4102) fabric is optional, with a BS 7837 equivalent available on request. Covered by a standard warranty (details available in the warranty terms).

Q&A

Which tent sizes are available?

The available sizes are 3 × 3 m, 4 × 4 m, 5 × 5 m and 6 × 6 m.

Can the roof and walls be custom printed?

Yes. The roof and walls support custom sublimation printing, and each canopy element can feature its own print.

Does the tent need continuous electrical power?

No constant power supply is required after the legs have been inflated.

How is the tent secured on different surfaces?

On suitable ground, secure each leg with ground stakes and tension all guy ropes using screw anchors. On hard ground, secure every leg with ballast weights.

Are pumps available?

Hand pumps and electric pumps are available as optional accessories.

Is a flame-retardant option available?

The standard fabric is non-flame-retardant. A B1 option meeting DIN 4102 is available, and a BS 7837 equivalent is available on request.

Next steps

Select the size and print configuration that suits your event requirements. Choose your options and place your order.

Specification

Construction Sealed-air inflatable structure with four legs
Structure material TPU foil
Cover material Polyester fabric
TPU insert thickness 0.3 mm
Polyester fabric weight 235 g/m²
Leg base material PVC on 5 × 5 m and 6 × 6 m versions
Printing method Sublimation print
Printable areas Roof and walls
Available sizes 3 × 3 m, 4 × 4 m, 5 × 5 m and 6 × 6 m
Power after inflation No constant power supply required
Canopy description Impregnated waterproof polyester fabric
Standard fabric Non-flame-retardant
Flame-retardant option B1 (DIN 4102)
UK equivalent option BS 7837 available on request
Repair curing time 60 minutes

Variants

Size Height Entrance size Tube diameter Covered area without walls Transport size Weight
3 × 3 m 270 cm 260 × 210 cm 22 cm 3.2 m² 70 × 45 × 45 cm; 50 × 25 × 20 cm 25 kg
4 × 4 m 310 cm 350 × 220 cm 25 cm 4.4 m² 90 × 50 × 45 cm; 50 × 25 × 20 cm 31 kg
5 × 5 m 390 cm 435 × 290 cm 31 cm 7 m² 110 × 60 × 50 cm; 70 × 45 × 45 cm; 50 × 25 × 20 cm 44 kg
6 × 6 m 470 cm 530 × 305 cm 37 cm 13 m² 140 × 70 × 50 cm; 70 × 45 × 45 cm; 50 × 25 × 20 cm 55 kg