Inflatable sealed air modular tent

Inflatable sealed air modular tent

Price on request

Price on request

*for order placed with the design approved by 3pm same day

This sealed-air modular inflatable tent creates a covered structure for outdoor events, promotions and information points. Connect additional modules to adjust the area and apply custom printing to every wall.

Key features

  • Sealed-air modules can be added or removed to adjust the covered area.
  • Choose a normal 3,4 x 4,5 m tent or a big 4,3 x 7,7 m tent, with additional modules available for both formats.
  • Custom printing can be applied to every wall, with sublimation print available.
  • A single module can operate independently as an information point or entry gate.
  • Setup requires two people and takes up to one hour for the normal tent or 1.5 hours for the big tent.

Materials & build

The structure uses TPU foil, polyester fabric and aluminium. Inflatable ribs contain sealed TPU inserts, while aluminium supports reinforce and connect the ribs. The side walls form the roof as one sheet of material, with walls and roof sheets attached to the structure by zips.

Branding & visibility

Sublimation print is available, with custom printing applied to every wall and advertising space across the tent canopy. Graphic design service is available.

Use cases & who it’s for

Suitable for outdoor promotions and events, the tent can be used for information or educational activities and large meetings. A single module can serve as an information point or entry gate. It can also be used as a medical or vaccination tent, by uniformed services or for rescue operations.

Setup, handling & transport

Choose a flat, even surface; inflate each module through its valve with a pump, connect the modules with bars, zip the walls in place and then fully inflate the structure; setup requires two people, a pump and a ladder, with the normal tent taking up to one hour and the big tent 1.5 hours. Secure every leg using the anchoring set; on hard ground, use ballast weights instead of stakes and anchors. The tent is not intended for permanent installation; do not use it above 38 km/h, and remove gathered roof water immediately and snow regularly. The tent is not adapted to severe weather conditions.

What’s included & options

The set includes a TPU foil structure, aluminium brackets, polyester cover, carry bags, anchoring set, hammer and repair kit. Optional accessories include hand and electric pumps, sand-filled or water weights, an LED panel, floor, mosquito net and window. Covered by a standard warranty (details available in the warranty terms).

Q&A

Which tent sizes are available?

The normal tent measures 3,4 x 4,5 m and is 300 cm high. The big tent measures 4,3 x 7,7 m and is 310 cm high.

Can the covered area be expanded?

Yes. Additional modules can be connected or removed to adjust the covered area. The normal additional module measures 3,4 x 2 m, while the big additional module measures 4,3 x 2,4 m.

Can every wall be custom printed?

Yes. Custom printing can be applied to every wall, and sublimation print is available.

What is required for setup?

Two people, a pump and a ladder are required. The structure must be installed on a flat, even surface and secured with the appropriate anchoring equipment or ballast weights on hard ground.

What comes with the tent?

The set includes the TPU foil structure, aluminium brackets, polyester cover, carry bags, anchoring set, hammer and repair kit.

Next steps

Request a custom quote to discuss your requirements for the Inflatable sealed air modular tent.

Specification

Technology Sealed air
Materials TPU foil; polyester fabric; aluminium
Inflation method Each module inflates through its valve using a pump
Printing Sublimation print; custom printing on every wall
Normal tent dimensions 3,4 x 4,5 m
Entrance size 1,15 x 2 m
Leg width 46 cm
Normal tent setup time Within 1 hour
Big tent setup time 1.5 hours
Setup team 2 people
Setup equipment required Pump and ladder
Wind limit 38 km/h
Weather resistance Rain, sun and wind
Flame-retardant fabric option Meets B1 requirements
Included items TPU foil structure; aluminium brackets; polyester cover; carry bags; anchoring set; hammer; repair kit
Optional accessories Hand pump; electric pump; sand-filled weights; water weights; LED panel; floor; mosquito net; window
Cleaning Clean the fabric with a warm damp cloth; do not use pressure washers
Storage Store clean and dry in a dry place

Variants

Variant Dimensions Height Tube diameter Weight
Normal tent 3,4 x 4,5 m 300 cm 46 cm 64 kg
Normal additional module 3,4 x 2 m 300 cm 46 cm 22 kg
Big tent 4,3 x 7,7 m 310 cm 46 cm 99 kg
Big additional module 4,3 x 2,4 m 310 cm 46 cm 26 kg