Inflatable sealed air billboard

Inflatable sealed air billboard

From £968.95 Excl. VAT

£968.95 Excl. VAT

?
?
?
?
?
Subtotal: £0.00 Excl. VAT
Estimated delivery date*: Thursday, 5th November

*for order placed with the design approved by 3pm same day

This customisable sealed-air advertising billboard creates a branded display wall, photo backdrop or event-space perimeter. Choose from two sizes and one- or two-sided full-colour sublimation printing, with no continuous power needed after inflation.

Key features

  • Sealed-air operation retains the air after inflation, maintaining the display shape without continuous power.
  • Small and Large sizes provide overall widths of 392 cm and 492 cm respectively.
  • Full-colour sublimation printing is available for one- or two-sided branding.
  • The interchangeable branding panel attaches with a zip.
  • The anchoring set includes spikes, guy lines and twisted ground anchors.
  • Transport bags are supplied for handling and storage.

Materials & build

The build uses an airtight TPU insert with inflating and safety valves, a tightly fitted polyester cover and a polyester banner. The available materials include impregnated polyester at approximately 235 g/m², durable TPU film and a PVC base plate. The banner surface sits within the billboard frame, and the interchangeable branding panel attaches by zip.

Branding & visibility

Full-colour sublimation printing is available on the outer cover and banner, with one- or two-sided branding. The zipped branding panel is interchangeable. Graphic design service is available.

Use cases & who it’s for

Use the display as an indoor or outdoor display wall, information wall, photo backdrop, booth perimeter or event-space perimeter. It can separate a space or cover a backroom or another unwanted view. Applications include conferences, concerts, festivals, educational campaigns and sporting events; remove the banner to use the structure as a small gate or wicket.

Setup, handling & transport

Setup takes 25 minutes on a flat, even spot, and assistance from another person makes the process more comfortable. Inflate with a pump, anchor each leg through the base rings, tension the guy lines to twisted ground anchors and zip in the banner; the valves then retain the air without continuous power. Use only in wind up to 38 kph and disassemble above this limit; the display is not adapted to strong winds, heavy rain, storms or hailstorms and must not be left unattended. Clean with a warm damp cloth, never a pressure washer, and store clean and dry. Each size has transport dimensions of 46 x 46 x 45 cm and 50 x 25 x 20 cm.

What’s included & options

The set includes a sublimation-printed polyester cover, single- or double-sided printed banner, TPU insert with inflating and safety valves, PVC base plate, anchoring set, hammer, repair kit and transport bags. The anchoring equipment comprises eight spikes, four guy lines and four twisted ground anchors. A pump is required but not included; optional accessories include a hand pump or a 1200W electric pump and 30 kg sand weights. Covered by a standard warranty (details available in the warranty terms).

Q&A

What size options are available?

The Small version measures 392 x 280 cm with a 300 x 225 cm banner and weighs 23 kg. The Large version measures 492 x 280 cm with a 400 x 225 cm banner and weighs 27 kg.

Does the billboard require continuous power?

No. A pump is required for inflation, but the valves retain the air after inflation, so no continuous power supply is needed.

Can the printing appear on both sides?

Yes. Full-colour sublimation printing is available with one- or two-sided branding on the outer cover and banner.

Can it be used indoors and outdoors?

Yes. Supported applications include indoor and outdoor display walls, photo backdrops and event-space perimeters. Optional steel weights can be placed over the legs for indoor stability.

Can the banner be removed?

Yes. The banner can be removed so the inflated structure can serve as a small gate or wicket.

Is flame-retardant fabric available?

Flame-retardant fabric meeting B1 requirements is available by special order.

Next steps

Choose the Small or Large size and select one- or two-sided branding for your display. Configure your inflatable billboard and proceed with your order.

Specification

Product type Customisable sealed-air inflatable advertising billboard
Technology Sealed air
Available sizes 392 x 280 cm; 492 x 280 cm
Banner sizes 300 x 225 cm; 400 x 225 cm
Tube diameter 46 cm
Materials Impregnated polyester, approx. 235 g/m²; durable TPU film; PVC base plate
Construction Airtight TPU insert with inflating valve and safety valve
Printing Full-colour sublimation printing
Branding format One- or two-sided
Branding panel Interchangeable and zip-attached
Setup time 25 minutes
Inflation Pump required; pump not included
Power after inflation No continuous power supply required
Wind limit Up to 38 kph
Repair kit contents Glue and foil patch
Repair adhesive bonding time 60 minutes

Variants

Variant Overall size Banner size Tube diameter Weight Transport size
Medium 392 x 280 cm 300 x 225 cm 46 cm 23 kg 46 x 46 x 45 cm; 50 x 25 x 20 cm
Large 492 x 280 cm 400 x 225 cm 46 cm 27 kg 46 x 46 x 45 cm; 50 x 25 x 20 cm