Inflatable sealed air balloon

Inflatable sealed air balloon

From £1,601.28 Excl. VAT

£1,601.28 Excl. VAT

?
?
?
?
Subtotal: £0.00 Excl. VAT
Estimated delivery date*: Thursday, 5th November

*for order placed with the design approved by 3pm same day

This inflatable sealed-air balloon creates a customisable advertising display for outdoor promotions and events. Choose full-colour sublimation printing with either a replaceable hook-and-loop banner or a printed middle band and factory colour.

Key features

  • 3 m high display with a 2.1 m balloon diameter and 1.1 m base diameter
  • Custom full-colour sublimation printing for logos, messages and additional base artwork
  • Airtight TPU insert with a safety valve that releases excess air to help prevent overinflation
  • No permanent power supply required after inflation
  • Setup within 30 minutes using the supplied pump and anchoring equipment
  • 19.5 kg transport weight and 90 × 50 × 45 cm transport size, with a transport bag included

Materials & build

Materials include impregnated polyester at about 235 g/m² and TPU film. The construction comprises a polyester cover and an airtight TPU film insert closed with a valve. The cover tightens when the balloon is filled, while a safety valve releases excess air to protect against overinflation.

Branding & visibility

Custom full-colour sublimation printing can place a main logo or message on the centre band, with additional information or artwork on the base. Choose a replaceable hook-and-loop banner or a printed middle band combined with a factory colour. Graphic design service is available.

Use cases & who it’s for

The balloon is suitable for outdoor promotional and event use, including sporting and cultural events. It can also be used for entertainment events on beaches, meadows and in parks, as well as festivals, reviews and concerts.

Setup, handling & transport

Set up on a flat, even surface, connect the supplied pump and inflate until the balloon reaches its initial shape. Attach the guy ropes, secure the base and complete the anchoring before use; no permanent power supply is required after inflation. The 19.5 kg display packs to 90 × 50 × 45 cm for transport in the included bag. Use is limited to temporary outdoor promotions and events; it is not intended for permanent installation and must be disassembled if wind exceeds 38 km/h. It must not be used during storms, heavy rain, snow or hail.

What’s included & options

The set includes a printed polyester cover, TPU insert, inflation valve, safety valve, anchoring set, hammer, repair kit, electric pump and transport bag. Optional accessories include 30 kg sand weights, 30 l water weights and interchangeable hook-and-loop banners. Standard fabric is non-flame-retardant; an optional B1 fabric compliant with DIN 4102 is available, with a BS 7837 equivalent available on request. Covered by a standard warranty (details available in the warranty terms).

Q&A

What branding formats are available?

Choose either a replaceable hook-and-loop banner or a printed middle band combined with a factory colour. Custom full-colour sublimation printing can display a main logo or message on the centre band and additional information or artwork on the base.

Does the balloon need a continuous power supply?

No. The electric pump is used for inflation, but no permanent power supply is required after the balloon has been inflated.

How is the display secured on hard ground?

Use ballast weights instead of stakes and ground anchors. Optional accessories include a 30 kg sand weight and a 30 l water weight.

How should the balloon be cleaned and stored?

Clean it with a damp cloth only, without pressure washers or chemicals. Ensure it is clean and fully dry before storing it in a dry environment; if packed wet, unpack and dry it as soon as possible.

Which events can this inflatable display be used for?

Supported applications include outdoor promotions, sporting and cultural events, entertainment events on beaches, meadows and in parks, and festivals, reviews and concerts.

Next steps

Select your preferred branding format and order the balloon for your next outdoor promotion or event.

Specification

Product type Inflatable branded balloon
Inflation technology Sealed air
Height 3 m
Balloon diameter 2.1 m
Base diameter 1.1 m
Polyester material weight About 235 g/m²
Insert material TPU film
Printing method Full-colour sublimation print
Inflation method Electric pump
Setup time Within 30 minutes
Power after inflation No permanent power supply required
Transport size 90 × 50 × 45 cm
Transport weight 19.5 kg
Anchoring equipment 4 spikes, 3 guy lines, 3 twisted ground anchors and hammer
Repair curing time 60 minutes

Variants

Variant Size Transport size Weight
Inflatable branded balloon 3 m 90 × 50 × 45 cm 19.5 kg