Inflatable constant air gate

Inflatable constant air gate

From £1,275.70 Excl. VAT

£1,275.70 Excl. VAT

?
?
?
?
?
?
?
Subtotal: £0.00 Excl. VAT
Estimated delivery date*: Thursday, 5th November

*for order placed with the design approved by 3pm same day

This constant-air inflatable event gate marks branded entrances, start lines and finish lines at sports events. Three size options, custom sublimation printing and replaceable banners support different clearance requirements and changing messages.

Key features

  • Three external sizes with internal openings ranging from 3.4×2.7 m to 8×4 m.
  • Custom branding can be applied to the legs and crossbeam.
  • Replaceable Velcro-mounted banners allow event messaging to be updated.
  • Built-in internal fan for constant-air operation.
  • Setup within 30 minutes using the supplied anchoring set.
  • Water-resistant fabric for event use.

Materials & build

The arch uses impregnated polyester and polyester fabric. The construction comprises a polyester cover with a built-in internal fan.

Branding & visibility

Custom sublimation print is available. Branding can be applied to the legs and crossbeam, while replaceable Velcro-mounted banners allow messaging to be updated. Graphic design service is available.

Use cases & who it’s for

The arch can mark a start line, finish line or entrance to a designated area. Supported settings include sports events, running events, cycling races, car races, ceremonial marches and closed events.

Setup, handling & transport

Set up on a flat, even surface within 30 minutes: fasten the zips at the base, connect the 230V fan and secure the arch with spikes and guy lines, positioning the fan on the side not used by customers. On hardened ground, place suitable weights inside the legs instead of using ground anchors; one person is needed for the small arch and two for the large arch. The arch may be used in winds up to 38 kph when appropriately secured, but it is not adapted to strong winds, heavy rain, storms or hail; disassemble it in stronger winds, never leave it unattended, and keep it away from heat sources and open flames. Before storage, clean the fabric with a warm damp cloth without detergents or pressure washers, ensure it is dry and keep it in a dry place.

What’s included & options

The set includes a polyester cover with built-in fan, anchoring set, eight spikes, four guy lines, four twisted ground anchors, a hammer and a transport bag. Available accessories include 15 kg cast-iron weights, 30 kg sand weights, 30 l water weights, replaceable Velcro-mounted banners, a sprinkler system, internal LED lighting and an arch with feet. Covered by a standard warranty (details available in the warranty terms).

Q&A

Can the inflatable gate be custom branded?

Yes. Custom sublimation print is available, and branding can be applied to the legs and crossbeam. Replaceable banners attach with Velcro for updated messaging.

Which sizes are available?

External sizes are 6×4 m, 8×4 m and 11.4×5.7 m. Their respective internal openings are 3.4×2.7 m, 5.4×2.7 m and 8×4 m.

What power and setup are required?

The built-in internal fan requires a 230V power source. Setup takes place within 30 minutes on a flat, even surface, with the arch secured to the ground.

Can the arch be installed on hardened ground?

Yes. On hardened ground, weights can be placed inside the legs instead of using ground anchors. Cast-iron, sand and water weights are available as accessories.

How should the arch be cleaned and stored?

Clean the fabric with a warm damp cloth and do not use detergents or pressure washers. Ensure the arch is clean and dry before placing it in the transport bag, then store it in a dry place.

Next steps

Choose the size and branding format that suit your event, then add the Inflatable constant air gate to your order. Select any required accessories for your intended setup.

Specification

Technology Constant air
Inflation method Built-in internal fan
Power requirement 230V fan
Material Impregnated polyester
Fabric Polyester fabric
Print method Custom sublimation print
Setup time Within 30 minutes
Water resistance Water-resistant fabric
Supported wind speed Up to 38 kph when appropriately secured
Banner attachment Velcro
Special-order fabric option Flame-retardant fabric meeting B1 requirements

Variants

External size Internal size Leg diameter Transport size Weight
6×4 m 3.4×2.7 m 1.3 m 90x50x45 cm; 50x25x20 cm 22 kg
8×4 m 5.4×2.7 m 1.3 m 90x50x45 cm; 50x25x20 cm 25 kg
11.4×5.7 m 8×4 m 1.7 m 140x70x45 cm; 50x25x20 cm 32 kg